The most elegant design solution to the perennial problem of where to place the all-important front speakers in a high-end home Theater installation, the motorized Ci3-80QT purrs down into position from the ceiling. With a 75mm (3") Uni-Q(R) array flanked by a pair of long-throw bass drivers of the same size, it combines Uni-Q`s exceptionally wide dispersion characteristics with fluent and accurate response right across the frequency range.

Whispered or shouted, on-screen dialogue and vocals become transparently clear, subtly nuanced and as perfectly located as the speakers themselves.

Features and Benefits
Purpose built for flush mounting into ceilings the Ci3-80QT is the latest addition to the KEF Uni-Q Custom Installation series. The 3-way, Ci3-80QT combines 100W power handling and 87dB sensitivity and consists of a polypropylene cone LF driver with the HF unit mounted between two matched size LF units.

·         Will require an additional 12 volt supply.

·         The bezel and grill can be painted to match the interior d?cor.

·         Ultra quiet motor assembly

·         Sealed enclosure

·         15mm (0.59in.) aluminum dome tweeter with Neodymium magnet (from KHT 6000)

·         75mm (2.95in.) polypropylene MF Unit (from KHT6000)

·         2 x 75mm (2.95in.) polypropylene LF Units (from KHT6000)

·         Simplified wiring system

·         Nominal impedance 8 ohm (Min 3.2Ω)

·         Recommended amplifier 10-100W

·         Easy fit (butterfly clip) mounting system

Architectural Specifications
The Ci3-80QT comprises a Uni-Q(R) array with a coincident mounted, twin neodymium magnet, 15mm (3⁄5") aluminum dome, high-frequency unit, a 75mm polypropylene midrange unit and two 75mm bass drivers. Performance should meet or exceed the following criteria:

Frequency response 1 meter on-axis with swept sinewave shall be 87Hz to 27kHz, sensitivity shall be at least 87dB for 2.83V@1m. The impedance and maximum power shall be 100W at 8 ohms.

Detailed Specifications:
Type: Uni-Q, 3 way, 4 driver configuration
HF Unit: 15 mm (0.59in.) Aluminium Dome
MF Unit: 75 mm (2.95in.) Polypropylene
LF Unit: 75 mm (2.95in.) Polypropylene x 2
Frequency range at ±3 dB: 87Hz - 27kHz
Sensitivity (2.83V/1m): 87dB
Rec. amplifier power: 10 - 100 W
Nominal Impedance: 8 ohms (min. 3.2 ohms)
Crossover frequency: 300Hz, 3kHz
Enclosure material: Steel
Terminals: terminal blocks up to ?2.5mm (0.1) conductor
Dimensions overall (H x W x D): 5 x 14.84 x 4.92 in. (128 x 377 x 125 mm)
Dimension cut out (H x W): 4.41 x 13.94in. (112 x 354mm)
Install depth: 120mm (4.72in.)